Tuning operation, Automatic tuning, Manual tuning – Yamaha EMX100CD User Manual
Page 28: E-20, Echo
E-20
Normally, if station signals are strong and there is no
interference, quick automatic-search tuning (Automatic
tuning) is possible. However, if signals of the station you
want to select are weak, you must tune to it manually
(Manual tuning).
Automatic tuning
1
Select the tuner by turning the INPUT SELECTOR until
“TUNER” appears on the display.
2
Select the reception band (FM or AM ) by pressing the
PRESET/TUNING/BAND button confirming it on the
display.
*
Do not select a preset tuning mode (Do not select the
mode in which “PRESET” lights up on the display.)
3
Press the AUTO/MAN’L button so that “AUTO” appears
on the display.
(In this mode, stations are received in stereo or monaural
automatically.)
4
Press the
button to tune to a higher frequency, or
press the
button to tune to a lower frequency.
(When tuned in to a station, “TUNED” will light up on the
display.)
5
If the station where tuning search stopped is not the
desired one, follow step 4 again.
*
If the tuning search does not stop at the desired station,
change to the Manual tuning method as described below.
*
STEREO indicator will light up when an FM stereo
broadcast with sufficient signal strength is received.
Manual tuning
1
1
Follow steps 1 and 2 of the Automatic tuning method.
2
2
Press the AUTO/MAN’L button so that “AUTO”
disappears from the display.
(In this mode, stations are received in monaural.)
3
3
Press and hold the
button to tune to a higher
frequency, or press and hold the
button to tune to a
lower frequency.
Release it just before reaching the desired frequency,
and then press it repeatedly until the desired frequency
appears.
(When tuned in to a station, “TUNED” will light up on the
display.)
Note
If you tune in to an FM station manually, it is received in
monaural automatically to increase the signal quality.
Note
Pressing the TUNER input selector button on the remote
control transmitter switches the tuner from a normal tuning
mode to a preset tuning mode and vice versa.
TUNING OPERATION
CD CHANGER RECEIVER EMX–100CD
PHONES
POWER
DISC
1
2
3
PROGRAM
ECHO
ECHO
MUSIC
USER
MEMORY
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY
MIC
MIN
MAX
MIC MIXING
REPEAT
TIME
MEMORY
AUTO/MAN'L
HOUR
PRESET/TUNING/BAND
A/B/C/D/E
MIN
TIME ADJ
TIMER
OPEN/
CLOSE
DISC
CHANGE
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B
C
D
+
I0
E
OPEN/CLOSE
RANDOM
REPEAT
MODE
6
6
7
7
8
8
9
0
CD
PRESET
TUNER
STOP
INPUT
PLAY/PAUSE
LEVEL
MUSIC
TEST
FLAT
CENTER/REAR
/DELAY
ECHO
PROGRAM
USER
POWER
DISPLAY
SLEEP
VOLUME
1
1
2
3,
2
2
4,
3
3