Specifications – Yamaha RX-V757 User Manual

Page 97

SPECIFICATIONS

ADDITIONAL

INFO

RMA

English

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround,

Surround back

20 Hz to 20 kHz, 0.06% THD, 8

!% ................................... 100 W

• Maximum Power (EIAJ)

[China, Korea and General models]

1 kHz, 10% THD, 8

!% ....................................................... 140 W

• Dynamic Power (IHF)

8/6/4/2

! ....................................................... 135/170/200/245 W

• DIN Standard Output Power [U.K. and Europe models]

1 kHz, 0.7% THD, 4

!% ...................................................... 150 W

• IEC Output Power [U.K. and Europe models]

1 kHz, 0.06% THD, 8

!%.................................................... 110 W

• Damping Factor (IHF)

20 Hz to 20 kHz, 8

!%.................................................120 or more

• Frequency Response

CD terminal to Front L/R .................... 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

PHONO to REC OUT (20 Hz to 20 kHz, 1 V) ..... 0.02% or less
CD, etc. to Front L/R

(20 Hz to 20 kHz, 50 W, 8

!)%............................ 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

Phono (5 mV) to REC OUT
[U.K., Europe and Australia models] .................... 81 dB or more
[Other models] ....................................................... 86 dB or more
CD (250 mV) to Front L/R, Effect Off ................ 100 dB or more

• Residual Noise (IHF-A Network)

Front L/R .............................................................. 150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO (shorted) to Front L/R ................. 60 dB/55 dB or more
CD (5.1 k

! terminated) to Front L/R ........ 60 dB/45 dB or more

• Tone Control (Front L/R)

BASS Boost/Cut ..................................................... ±6 dB/50 Hz
BASS Turnover Frequency ............................................... 350 Hz
TREBLE Boost/Cut .............................................. ±6 dB/20 kHz
TREBLE Turnover Frequency ......................................... 3.5 kHz

• Phones Output ......................................................... 150 mV/100

• Input Sensitivity/Input Impedance

PHONO ................................................................. 2.5 mV/47 k

CD, etc. ................................................................ 200 mV/47 k

MULTI CH INPUT .............................................. 200 mV/47 k

• Output Level/Output Impedance

REC OUT ........................................................... 200 mV/1.2 k

PRE OUT .................................................................... 2 V/1.2 k

SUBWOOFER ........................................................... 4 V/1.7 k

ZONE 2 OUTPUT
[U.S.A., Canada, Australia and
Europe models] ................................................... 200 mV/1.2 k

VIDEO SECTION

• Video Signal Type ........................................................ PAL/NTSC

• Signal to Noise Ratio .............................................. 50 dB or more

• Frequency Response (MONITOR OUT)

Composite, S-video ................................ 5 Hz to 10 MHz, –3 dB
Component ............................................. 5 Hz to 60 MHz, –3 dB

FM SECTION*

• Tuning Range

[U.S.A. and Canada models] ......................... 87.5 to 107.9 MHz
[General model] ...................... 87.5/87.50 to 108.0/108.00 MHz
[Other models] .......................................... 87.50 to 108.00 MHz

• Usable Sensitivity (IHF)...................................... 1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo ............................................................ 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ............................................................... 0.2%/0.3%

• Stereo Separation (1 kHz) ..................................................... 42 dB

• Frequency Response ........................ 20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION*

• Tuning Range

[U.S.A. and Canada models] ............................. 530 to 1710 kHz
[General model] ................................ 530/531 to 1710/1611 kHz
[Other models] .................................................. 531 to 1611 kHz

• Usable Sensitivity ............................................................ 300 µV/m

GENERAL

• Power Supply

[U.S.A. and Canada models] ............................ AC 120 V, 60 Hz
[Australia model] ............................................. AC 240 V, 50 Hz
[China model] ................................................... AC 220 V, 50 Hz
[Korea model] .................................................. AC 220 V, 60 Hz
[U.K. and Europe models] ............................... AC 230 V, 50 Hz
[General model] ............. AC 110/120/220/230–240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] ................................ 400 W/500 VA
[Other models] .................................................................. 440 W

• Standby Power Consumption ..................................... 0.1 W or less

• AC Outlets

[U.K. and Australia models] ............. 1 (Total 100 W maximum)
[U.S.A., Canada and China models] ... 2 (Total 100 W maximum)
[Europe and General models]................ 2 (Total 50 W maximum)

• Dimensions (W x H x D) ................................ 435 x 171 x 420 mm

• Weight ................................................................................. 12.5 kg

*Except DSP-AX757SE

SPECIFICATIONS

This manual is related to the following products:

DSP-AX757SE