Macintosh users – Yamaha CD-R/RW Drive CRW6416SX User Manual

Page 9

Macintosh Users

Setup Flowchart

STEP

1-1

STEP

1-2

STEP

YES

Set up the CRW6416SX drive

Check that the CRW6416SX
drive is recognized correctly

Obtain a SCSI adapter card

Install the SCSI adapter card

Recommended model:
Adaptec PowerDomain 2930U (PCI)

Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.

Start using the CRW6416SX
drive!

Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.

1. Set the switches at the rear of the drive.

(P.10, 11)

2. Connect the SCSI and power cables,

then switch the drive on. (P.16-18)

For details about how to install the
software, refer to the documentation
that came with it.

Start up the CD writing software and check
that the drive is recognized correctly.

Does your Macintosh have
a built-in SCSI connector?

Install the CD writing
software

CRWSX_e.qx 7/8/99 3:08 PM Page 9