Setup flowchart, Windows users – Yamaha CD-R/RW Drive CRW6416SX User Manual

Page 8

Setup Flowchart

These flowcharts show the procedure for setting up the CRW6416SX drive. For
easy cross-referencing, the relevant pages in this manual are also given.

Windows Users

STEP

1-1

STEP

1-2

STEP

YES

Do you have a SCSI adapter
card?

Check that the SCSI adapter
card is recognized correctly

Set up the CRW6416SX drive

Install the CD writing software

Check that the CRW6416SX drive
is recognized correctly (P.20)

Obtain a SCSI adapter card

Install the SCSI adapter card

Recommended models:
Adaptec AHA-2940-series (PCI)

Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.

Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter card is
recognized correctly by the computer’s OS.

Go to Control Panel | System | Device
Manager tab. Double-click on CDROM
to check that the drive is recognized
correctly by the computer’s OS.

For details about how to install the
software, refer to the documentation that
came with it.

Start using the CRW6416SX
drive!

Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.

1. Set the switches at the rear of the drive.

(P.10, 11)

2. Connect the SCSI and power cables,

then switch the drive on. (P.16-18)

CRWSX_e.qx 7/14/99 4:46 PM Page 8