Yamaha CD-R/RW Drive CRW6416SX - Manual (Page 11)

4
System Configuration
In order to use the CRW6416SX drive, your computer system will need to meet
the following set of requirements.
Computer
The minimum system requirements for using the CRW6416SX drive are as
follows:
● Any fully PC/AT-compatible computer.
● A Pentium-class CPU running at 133MHz or faster. (200MHz or faster
recommended.)
n Macintosh users will require a 68040 or PowerPC CPU and at least 16MB of memory.
● OS: Windows 95, Windows 98, or Windows NT4.0 with Service Pack 3/4/5.
n Macintosh users will require System 7.5.3 or above.
● A spare PCI slot for a SCSI card (if one hasn’t been installed yet).
● A SCSI card to connect SCSI devices (including the CRW6416SX) to your
computer. Make sure it has a half-pitch 50-pin D-sub external connector.
Yamaha recommends any of Adaptec’s AHA-2940-series cards (PCI slot).
n Many Apple Macintosh computers have built-in SCSI connectors. However, if your Macintosh
does not have a built-in SCSI connector, you will need to obtain a PCI bus SCSI adapter card.
(Yamaha recommends Adaptec’s PowerDomain 2930U card.)
n For details about how to install the SCSI adapter card, refer to the documentation that came with it.
CRWSX_e.qx 7/14/99 4:46 PM Page 11