beautypg.com

Connecting the speaker cables, Connecting the subwoofer – Yamaha DVX-S301 User Manual

Page 22

background image

SYSTEM CONNECTIONS

17

Eng

lish

PREP

ARA

TION

2

Connecting the speaker cables

Connect the speaker cable with the color band to the plus
(Red (+)) connector on the front/center/surround speakers
and with the white line to the minus (Black (–)) connector.

Connecting the subwoofer

Insert the cable plug of the speaker cable into the speaker
jack of the same color until you hear it click into place.

• FRONT R (Red), CENTER (Green), FRONT L

(White):

Insert the cable plug facing the tub

upwards.

• SURROUND R (Gray), SURROUND L (Blue):

Insert the cable plug facing the tub downwards.

Before connecting the speaker cables to the subwoofer
(NX-SW300), remove the cable plugs from supplied
speaker cables.
Press and hold the release button and remove the supplied
speaker cable from the cable plug.

Be sure to twist the cable core firmly in a clockwise
direction. Twisting loosely may cause a short.

FRONT R (Red), CENTER (Green), FRONT L
(White):
SURROUND R (Gray), SURROUND L (Blue):

Do not use excessive force when inserting the cable
plug. Doing so may damage the cable plug or speaker
jack.

Lever
(Black)

Color
band

Press the lever down, then
insert the cable into the hole
and release the lever.

Lever
(Red)

Press the lever down, then
insert the cable into the hole
and release the lever.

Color
band

Lever
(Red)

Lever
(Black)

Tab

Red

Green

Tab

Gray

White

Blue

NX-SW301

Note

Note

Release button

Good

No Good

FRONT CENTER SURROUND

SPEAKERS

Lift up the lever, then insert
the cable into the hole and
replace the lever.

Lever

color
band

NX-SW300

This manual is related to the following products: