Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 73)

Keyboard Wedge Interface 5-15
FN1 Substitution
When enabled, this parameter allows replacement of any FN1 characters in an EAN128 bar
code with a keystroke chosen by the user. (see
FN1 Substitution Values on page 9-9 ).
Enable FN1 Substitution
*Disable FN1 Substitution
Send Make and Break
When enabled, the scan codes for releasing a key are not sent.
*Send Make and Break Scan Codes
Send Make Scan Code Only