Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 196)

WLS 8400 Product Reference Guide 8-50
MSI
Enable/Disable MSI
To enable or disable MSI, scan the appropriate bar code below.
Enable MSI
*
Disable MSI
Set Lengths for MSI
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Lengths for MSI may be set for any length, one
or two discrete lengths, or lengths within a specific range.
One Discrete Length - This option allows the scanner to decode only those MSI symbols
containing a selected length. Lengths are selected from the numeric bar codes beginning on
page
D-1 in Chapter D, Numeric Bar Codes . For example, to decode only MSI symbols
with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. In case
of an error, or to change the selection, scan Cancel on page
D-7 .
MSI - One Discrete Length