GIGABYTE GA-MA790XT-UD4P - Manual (Page 87)

Appendix - 87 -
For GIGABYTE SATA2 SATA controller:
Insert the floppy disk containing the SATA RAID/AHCI driver and press . Then a controller menu
similar to Figure 3 below will appear. Select (Windows XP/2003) RAID/AHCI Driver for GIGABYTE
GBB36X Controller and press .
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
(Windows XP/2003) RAID/AHCI Driver for GIGABYTE GBB36X Controller
(Windows 2000) RAID Driver for GIGABYTE GBB363 Controller
(Windows 2000) AHCI Driver for GIGABYTE GBB363 Controller
(Windows 2000) RAID Driver for GIGABYTE GBB360 Controller
Step 3:
On the next screen, press to continue the driver installation. After the driver installation, you can
proceed with the Windows XP installation.
Figure 3