Figure 4 – GIGABYTE GA-MA790XT-UD4P User Manual
Page 81

Appendix
- 81 -
Figure 5
Create a RAID Array:
In the main screen, press
screen appears (Figure 4).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.59
[ Create New RAID ]
Name:
GRAID_
Level:
0-Stripe
Disks:
Select Disk
Block:
128 KB
Size:
240 GB
Confirm Creation
[ RAID Disk Drive List ]
[]-Move Cursor
[DEL,BS]-Delete Character
[ENTER]-Next
[ESC]-Abort
[ Hard Disk Drive List ]
Model Name
Available
Type/Status
HDD0: ST3120026AS
120 GB
Non-RAID
HDD1: ST3120026AS
120 GB
Non-RAID
[ Help ]
Enter RAID Name
Enter a string between 1 to 16 characters
in length for the created RAID drive to be
identified by system BIOS or OS.
Figure 4
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.59
[ Create New RAID ]
Name: GRAID
Level:
0-Stripe
Disks:
Select Disk
Block:
128 KB
Size:
240 GB
Confirm Creation
[ RAID Disk Drive List ]
[]-Switch RAID Level
[ENTER]-Next
[ESC]-Abort
[ Hard Disk Drive List ]
Model Name
Available
Type/Status
HDD0: ST3120026AS
120 GB
Non-RAID
HDD1: ST3120026AS
120 GB
Non-RAID
[ Help ]
Select RAID Level
RAID 0
-
Data striped for performance
RAID 1
-
Data mirrored for redundancy
JBOD
-
Data concatenated for huge
temporarily disk required
The Create New RAID block displays all the items that need to be set for creating an array (Figure 5).
Steps:
1. Enter Array Name: Under the Name item, enter an array name with 1~16 letters (letters cannot be
special characters) and press
2. Select RAID Mode: Under the Level item, use up or down arrow key to select RAID 0 (Stripe),
RAID 1 (Mirror), or JBOD (Figure 5). Then press