Transpose, Setting transposition, Transpos – Yamaha PSR-330 User Manual

Page 40

,,,,,,,,,,,,,,,,

QQQQQQQQQQQQQQQQ

Transpose

This functions allow the overall pitch of the PSR-330 to be transposed up or down by a
maximum of one octave in semitone increments.

Setting Transposition

Use the TRANSPOSE [▼] and [▲] buttons to set the desired degree of transposi-

tion. Press either button briefly to decrement or increment by one, or hold for
continuous decrementing or incrementing. The current transpose value will appear on
the top line of the display for a few seconds whenever one of the TRANSPOSE buttons
is pressed — during this time the [–] and [+] buttons or number buttons can also be
used to set the transpose value (the transpose value also appears continuously above
“TRANSPOSE” in the display).

• Press the TRANS-

POSE [

▼

] and [

▲

]

buttons simulta-
neously to instantly
reset the transpose
value to “0”.

• The new TRANS-

POSE value will take
effect from the next
key played.

• The TRANSPOSE

value cannot be
changed during song
playback or while the
record mode is en-
gaged.

The transpose range is from –12 to +12. Each step corresponds to one semitone,

allowing a maximum upward or downward transposition of 1-octave. A setting of “0”
produces the normal pitch.

-02

VOICE L

VOICE R2

VOICE R1

Transpos

REVERB

TRANSPOSE

REPEAT

TRANSPOSE