Premio Computer Aries/Centella User Manual
Page 70
AWARD
®
BIOS Setup
3-7
IDE Primary Master/Primary Slave/Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<-> to select the hard disk drive type. The
specification of hard disk drive will show up on the right hand according to
your selection.
Access Mode
The settings are Auto, CHS, LBA and Large.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation cylinder.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
Drive A/B
This item allows you to set the type of floppy drives installed. Available
options are None, 360K, 5.25 in., 1.2M, 5.25 in., 720K, 3.5 in., 1.44M, 3.5
in., 2.88M, 3.5 in..
Video
The item sets the type of video adapter used for the primary monitor of the
system . Available options are EGA/VGA , CGA 40, CGA 80 and MONO.
Menu Level
88
To auto-detect the
HDD’s size, head...on
this channel
IDE HDD Auto-Detection
Press Enter
IDE Primary Master
[Auto]
Access Mode
[Auto]
Capacity
15021MB
Cylinder
291024
Head
16
Precomp
0
Landing Zone
29103
Sector
63
IDE Primary Master
Item Help