Premio Computer Aries/Centella - Manual (Page 110)

Chapter 4
4-14
Power Management Setup
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) Function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Yes. Settings: Yes and No.
ACPI Standby State
This item specifies the power saving modes for ACPI function. Options are:
S1/POS The S1 sleep mode is a low power state. In this state,
no system context is lost (CPU or chipset) and hard-
ware maintains all system context.
S3/STR The S3 sleep mode is a lower power state where the
information of system cofiguration and open applica-
tions/files is saved to main memory that remains
powered while most other hardware components turn
off to save energy. The information stored in memory
will be used to restore the system when an “wake up”
event occurs.
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)1999 American Megatrends, Inc. All Rights Reserved
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
IPCA Function :Yes
ACPI Standby State :S1/POS
USB Wakeup From S3 :Disabled
Mouse Wakeup From S3 :Disabled
Keyboard Wakeup From S3 :Disabled
Specific Key for Wakeup :N/A
Power Management/APM :Enabled
Sleep State LED :Blinking
Suspend Time Out (Minute) :Disabled
FDC/LPT/COM Ports :Monitor
Primary Master IDE :Monitor
Primary Slave IDE :Ignore
Secondary Master IDE :Monitor
Secondary Slave IDE :Ignore
Power Button Function :Suspend
Wake Up On Ring :Enabled
Wake Up On LAN :Disabled
Wake Up On PME :Enabled
Resume By RTC Alarm :Disabled
RTC Alarm Date :15
RTC Alarm Hour :12
RTC Alarm Minute :30
RTC Alarm Second :30
Power Again :Last State