Setup menus, User menu, Operation – Panasonic AJ-HD150 User Manual
Page 56
– 56 –
Setup menus
USER menu
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
100
SEARCH
0000
DIAL
ENA
0001
KEY
101
SHTL MAX
0000
Ч
8.4
0001
Ч
16
0002
Ч
32
102
FF. REW
0000
×
16
MAX
0001
Ч
32
0002
Ч
50
0003
Ч
60
0004
Ч
100
104
REF
0000
OFF
ALARM
0001
ON
105
AUTO EE
0000
S/F/R
SEL
0001
STOP
106
EJECT EE
0000
OFF
SEL
0001
BLACK
0002
GRAY
The underline on the setting item denotes the initial setting.
This selects the direct search dial operation.
0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
search button is pressed.
This sets the maximum speed for shuttle operations.
0: 8.4
×
normal speed
1: 16
×
normal speed
2: 32
×
normal speed
This sets the maximum speed for FF and REW operations.
0: 16
×
normal speed
1: 32
×
normal speed
2: 50
×
normal speed
3. 60
×
normal speed
4. 100
×
normal speed
DVCPRO-HD and 32X for DV or DVCAM.
This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
This selects the VTR mode in which the EE status is to be
established when the TAPE/EE switch has been set to EE.
0: The EE status is established in the stop, FF or REW mode.
1: The EE status is established in the stop mode only.
Mbps), DV or DVCAM format is characterized by a black
picture and muted sound.
This selects the video and audio output statuses in the eject
mode.
0: The EE status is always established regardless of the
TAPE/EE switch position.
1: The statuses depend on the TAPE/EE switch position:
EE:
The EE status is established.
TAPE: The video signals turn black; the audio signals are
muted.
2: The statuses depend on the TAPE/EE switch position:
EE:
The EE status is established.
TAPE: The video signals turn gray; the audio signals are
muted.
Mbps), DV or DVCAM format is characterized by a black
picture and muted sound.
Setup menus