Pioneer PDP-4214HD - Manual (Page 9)

02 Safety Precautions
English
9
En
Installation Precautions
Observe the following precautions when installing with any items such as the optional brackets.
When using the optional brackets or equivalent items
• Ask your dealer to perform the installation.
• Be sure to use the supplied bolts.
• For details, see the instruction manual that comes with the optional brackets (or equivalent items).
Rear view Side view
• Be sure to use four mounting holes covered with rubber cap.
• Use M6 screws, which go 10 mm (3/8 inches) in depth from the mounting surface of the Plasma Display. See the side view above.
• Be careful not to block the ventilation opening at the rear of the Plasma Display.
• Be sure to install the Plasma Display on a flat surface because it contains glass.
• The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified
products.
• It is strongly recommended to use the optional PIONEER mounting products.
• PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than the
optional PIONEER products.
Mounting holes covered with rubber cap
Mounting surface
Mounting bracket (or
equivalent item)
M6 screw
10 mm (3/8 inches)
Plasma
Display
04-PDP42A3HD-Eng (05-10) 05.4.20, 4:30 PM 9