Pioneer PDP-4214HD - Manual (Page 25)

08 Tuner Setup
English
25
En
Setting up TV channels
This section describes how to search and set up TV channels
that you can watch under the current conditions. Unless you set
up TV channels using Scan Channels, you may not be able to
tune in any channels.
Scanning Channels Automatically
You can automatically scan channels for the frequency ranges
available.
1 Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
Move Enter Return
3 Select Scan Channels and press the \ or OK button.
4 Select Analog Channel Band and press the \ or OK
button.
5 Press the c or d button to select the required signal
source (Air, STD, HRC or IRC), then press the [ or
BACK button.
6 Move to Start by pressing the c or d button and start the
search by pressing the \ or OK button.
Scan Channels
Cancel
Analog Channel
Now Searching...
30%
Analog Channels 0
Digital Channels 0
0
0
The scan start. The scanned channels are automatically
stored in order. To stop scanning, press the BACK button.
7 When finished scanning, press the EXIT button.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.
Scanning Analog Channels Manually
You can choose if you want to store the channels.
1 Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
08 Tuner Setup
3 Press the c or d button to move to Scan Analog
Channel, then press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
Move Enter Return
4 Press the c or d button to move to Band, then press the
\ or OK button.
Band Air
Channel 0
Name Channel
Fine Tune
Store
Adjust Return
Scan Analog Channel
Air
Cable
5 Press the c or d button to select the required signal
source (Air, STD, HRC or IRC), then press the [ or
BACK button.
6 Move to Channel by pressing the c or d button and
select the channel number by pressing the [ or \
button.
Band Air
Channel 2
Name Channel
Fine Tune
Store
Move Adjust Return
Scan Analog Channel
7 Press the c or d button to move to Store by pressing the
c or d button, then press the OK button.
• You can receive the selected channel.
8 If you want to edit the channel name, press the c or d
button to move to Name Channel, then press the \ or
OK button.
Band Air
Channel 0
Name Channel
Fine Tune
Store
Adjust Move Return
Scan Analog Channel
9 Press the c or d button to select a letter (A~Z, a~z), a
number (0~9) or a symbol (space, {I}~! “#$%& ()*+,-./:;
<=>?@[\]^_`). Move to the previous or next letter by
pressing the [ or \ button.
10 When you have finished entering the channel name, press
the OK button.
11 Press the c or d button to move to Store by pressing the
c or d button, then press the \ or OK button.
09-PDP42A3HD-Eng (25-31) 05.4.20, 4:31 PM 25