Pioneer PDP-4214HD - Manual (Page 33)

9 Adjustments and Settings
English
33
En
Customizing the Picture Settings
This Plasma Display has several setting options that allow you
to control the picture quality.
1 Press the MENU button.
2 Press the c or d button to move to Picture, then press
the a or OK button.
3 Press the c or d button to select the required option as
follows, then press the a or OK button.
Brightness - Contrast - Sharpness - Color - Tint
Picture
AV Selection Standard
Brightness 30
Contrast 30
Sharpness 30
Color 30
Tint 30
Noise Reduction Off
Color Temp
Move Enter Return
Brightness 30
A horizontal bar is displayed. Press the b or a button
until you reach the optimal setting.
To select other options, press the c or d button.
Item | button \ button
Brightness For less brightness For more brightness
Contrast For less contrast For more contrast
Sharpness For less sharpness For more sharpness
Color For less color For more color
intensity intensity
Tint Skin tones become Skin tones become
purplish greenish
4 Press the BACK or MENU button to return to the picture
menu.
5 Press the EXIT button.
• If you make any changes to the options, the picture mode is
automatically switched to User.
Using the Noise Reduction Feature
1
Press the MENU button.
2 Press the c or d button to move to Picture, then press
the a or OK button.
3 Press the c or d button to move to Noise Reduction,
then press the a or OK button.
4 Press the c or d button to select the required option as
follows:
Off - On
Off
On
Picture
AV Selection Standard
Brightness 30
Contrast 30
Sharpness 30
Color 30
Tint 30
Noise Reduction Off
Color Temp
Adjust Return
• The factory default is “Off”.
5 Press the EXIT button.
• If you make any changes to the options, “AV Selection” is
automatically switched to “User”.
10-PDP42A3HD-Eng (32-38) 05.4.20, 4:31 PM 33