Panasonic AG-DV2500P - Manual (Page 6)

E-6
INTRODUCTION
Precautions
Ⅵ Place of storage and use
Please avoid storing or using this VTR in the fol-
lowing places:
● Extremely hot or cold places beyond the al-
lowable temperature for operation (5˚C – 35˚C).
● Humid or dry places beyond the allowable
humidity range for operation (30% –80% RH).
● Dusty or sandy places.
● Places exposed to oil, smoke or steam, such
as the kitchen vicinity.
● Intensely vibrating or unstable places.
● Places prone to condensation.
● Places that generate strong magnetic fields,
e.g., transformer or motor.
● Places near devices that generate electric
waves, e.g., transceiver or mobile phone.
● Places that generate radiation, X-rays or cor-
rosive gases.
Ⅵ Handling the unit
● Please do not place heavy objects on the VTR,
like a monitor or TV.
● Please do not insert foreign objects into the
cassette slot.
● Mind your finger when loading the cassette.
Please be careful not to get your fingers
clamped when loading the cassette to prevent
injury.
● Place this VTR out of reach of young children.
As injury may result from fingers getting
clamped when loading the cassette, please
keep this VTR out of reach of young children.
● Please do not block the ventilation openings.
● Avoid violent shocks to the unit. Do not drop
the unit.
● Please remove the cassette tape from the
cassette slot when transporting the unit.
● Please remove the AC adapter to save en-
ergy when the unit is not in use.
Ⅵ Maintaining the unit (Please turn off the
power before performing maintenance
work.)
Please wipe the unit with a soft cloth. Do not wipe
it with thinner or benzene lest the surface melts
or becomes dull. For stubborn stains, wipe first
with a water-diluted neutral detergent and then
wipe dry.
Ⅵ Please use the provided AC adapter to
connect the VTR to a power source.
Ⅵ Use the supplied mains cable. Using a
different type or damaged cable may
cause fire or electric shock.
Note
Before turning on the power, be sure to re-
move the guard sheet. (Otherwise, a warning
display will be shown. In this case, turn the
power off and then on again.)