Panasonic AG-DV2500P - Manual (Page 33)

E-33
DV IN/OUT
AUDIO VIDEO
CH 1/3 CH 2/4 LINE S -VIDEO
N
I
O
U
T
9PIN REMOTE
AUX NTSC PAL
DC 12V
WARNING : SHOCK HAZARD - DO NOT OPEN.
AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
Player
DV terminal
Separately available
DV cable
Another VTR
Flow of
signal
DV terminal
Recorder
Monitor
DV IN/OUT
AUDIO VIDEO
CH 1/3 CH 2/4 LINE S -VIDEO
N
I
O
U
T
9PIN REMOTE
AUX NTSC PAL
DC 12V
WARNING : SHOCK HAZARD - DO NOT OPEN.
AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
S-VIDEO IN
VIDEO OUT VIDEO LINE IN
AUDIO
IN
AUDIO
OUT
S-VIDEO
OUT
Player
Another VTR
Flow of
signal
Y/C(S) video cable
Monitor
Video cable
Audio cable
Recorder
Memo
• When signals are input from the DV terminal, the sound recording mode of the recorder is the same
as that of the player.
• The Date and time data from the DV terminal will be recorded.
• To record the time code data from the DV terminal, set the DV TC DUP. item of the TIME CODE
menu to ON. (
☞
Page 58)
RECORDING
– Connection and setting –
This chapter explains the connection, setting and operation methods required to use this unit
as a recorder.
This unit cannot be used as an editing system recorder.
Connection
Ⅵ When connected to a video device equipped with a DV terminal
Images can be recorded with almost no deterioration of image quality.
Ⅵ This unit is connected to a video device with no DV terminal (analog input) :
Memo
• When search pictures or low-quality video signals are input, video and sound output may be tempo-
rarily distorted. Please input stable signals via a TBC, etc.
• For analog input, use either Y/C(S) video cable or video cable. Set the front [INPUT] input video
signal selection switch according to the chosen cable.