Panasonic HD1700pe - Manual (Page 94)

94
Setup menus
The underlining (__) denotes the factory setting mode.
(continued)
No./Item Description of setting No./Item Description of setting
627
D/C ENH V
For accentuating the vertical contours during
down-conversion and line conversion
(1080i
< <> > 720p).
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
628* 5
U/C ENH H
For accentuating the horizontal contours
during up-conversion.
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
629* 5
U/C ENH V
For accentuating the vertical contours during
up-conversion.
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
630* 2
1080i > >HD_
OUT
For selecting the HD output signal format
during 1080i tape playback or in the 1080i EE
mode. (See table below.)
0000 1080i
0001 720p
0002 1080i
631* 2
1080i > >SD_
OUT
For selecting the SD output signal format
during 1080i tape playback or in the 1080i EE
mode. (See table below.)
0000 480i
0001 --------
0002 480p
0000 1080i
(no conversion) 480i (down-
converted output) 480i (down-
converted output)
720p (line-
converted output) 480i (down-
converted output) 480i (down-
converted output)
1080i
(no conversion) 480p* (down-
converted output) 480i (down-
converted output)
0001
0002
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
632* 2
720p > >HD_
OUT
For selecting the HD output signal format
during 720p tape playback or in the 720p EE
mode. (See table below.)
0000 1080i
0001 720p
0002 720p
634* 2
480p > >HD_
OUT
For selecting the HD output signal format
during 480p tape (DVCPRO50P) playback.
(See table below.)
0000 1080i
0001 720p
0002 ---------
635* 2
480p > >SD_
OUT
For selecting the SD output signal format
during 480p tape (DVCPRO50P) playback.
(See table below.)
0000 480p
0001 480p
0002 480i
633* 2
720p > >SD_
OUT
For selecting the SD output signal format
during 720p tape playback or in the 720p EE
mode. (See table below.)
0000 --------
0001 480i
0002 480p
0000 1080i (line-
converted output) 480i (down-
converted output) 480i (down-
converted output)
720p
(no conversion) 480i (down-
converted output) 480i (down-
converted output)
720p
(no conversion) 480p* (down-
converted output) 480i (down-
converted output)
0001
0002
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
0000 1080i (up-
converted output) 480p*
(no conversion) 480i (down-
converted output)
720p (up-
converted output) 480p*
(no conversion) 480i (down-
converted output)
Muted 480i (down-
converted output) 480i (down-
converted output)
0001
0002
During SD tape playback, the VTR cannot be operated in the 60
Hz mode.
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
The numbers on the superimposed
display are approximations only.
The numbers on the superimposed
display are approximations only.
There is no output in the 60 Hz
mode.
The numbers on the superimposed
display are approximations only.
*1: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)
or 50 Hz mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting.
*2: This item is not displayed when the 25 Hz (HD or SD) mode has
been selected as the system menu item No.25 (SYSTEM FREQ)
setting.
* Setup menu item No.107 and INPUT CHECK do not function,
and the same signal as this signal line is output.
There is no output in the 60 Hz
mode.