PSC PT2000TM - Manual (Page 25)

The Beeper
User’s Guide 15
The virtual display continues to maintain the latest 24 lines of data once
all lines of the virtual display are full. The oldest data is “pushed off the
top” as new data is added at the bottom.
Displaying Information about the Portable
Display information about the portable by scrolling the display screen
past the last character on a current line. Press the
key until the
version number is displayed. The display screen lists the system version
number and the amount of random-access memory installed (refer to
Figure 2-4 ).
Figure 2-4: Display screen showing version number
The Beeper
The portable provides audible feedback to indicate when a bar code has
been scanned successfully and to acknowledge when a key is pressed.
The default setting provides one beep to indicate a good scan or key
entry. Another beep sequence warns of possible problems. The pitch,
number, volume, and length of beeps are all programmable.
PT2000
Vers. 4.0
128k