Dvr-860 pin function description – Planet Technology DVR-860 User Manual
Page 72
-66-
‧ DVR-860
PIN
FUNCTION
DESCRIPTION
1
GND
GROUND
2~9
ALARM INPUT
When connecting the wire from ALARM INPUT (PIN 2 -- 9) to GND (PIN 1)
connector, DVR will start recording and the buzzer will be on.
When “MENU -> ADVANCE -> DETECTION -> DETECTION SETUP -> ALARM” is
set to “Low” : When the alarm input signal is “ Low ”, the unit starts to record and
buzzer.
When “MENU -> ADVANCE -> DETECTION -> DETECTION SETUP -> ALARM” is
set to “High” : When the alarm input signal is “ High ”, the unit starts to record and buzzer.
10
PIN OFF
11
TXD232
DVR can be controlled remotely by the keyboard of PC by using RS-232 serial communication
signals.
12
RS485-A
DVR can be controlled remotely by the keyboard of PC by using RS-485 serial communication
signals.
13
EXTERNAL
ALARM NO.
Under the normal operation, COM disconnects with NO. But when any alarm is
triggered, COM connects with NO.
Attention: The voltage restriction is under DC24V 1A.
14
PIN OFF
15~22
ALARM INPUT
When connecting the wire from ALARM INPUT (PIN 15 -- 22) to GND (PIN 1) connector, DVR
will start recording and the buzzer will be on.
When “MENU -> ADVANCE -> DETECTION -> DETECTION SETUP -> ALARM” is
set to “Low” : When the alarm input signal is “ Low ”, the unit starts to record and buzzer.
When “MENU -> ADVANCE -> DETECTION -> DETECTION SETUP -> ALARM” is
set to “High” : When the alarm input signal is “ High ”, the unit starts to record and buzzer
23
RXD232
DVR can be controlled remotely by the keyboard of PC by using RS-232 serial communication
signals.
24
RS485-B
DVR can be controlled remotely by the keyboard of PC by using RS-485 serial communication