Panasonic PV-V4622 - Manual (Page 35)

35
*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
The VCR VCR/TV selection can be set to
auto or manual.
Press ACTION
to return to normal screen. 3
1 Press ACTION
to display menu.
SELECT :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
VCR C / A CLOCK CH
For more on VCR/TV selection, see “Record
one station, watch another” and “Select
channels at VCR” sections (p.15).
VCR/TV Selector Feature
Note
VCR C / A CLOCK CH
SELECT : SET :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :ON
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
The power shuts off at a preset time.
2
1 Press ACTION
to display menu.
Press
to select AUTO
SHUT-OFF.
Press repeatedly
to change shutoff
time as shown
below.
Auto Shut-Off Feature
Press ACTION
to return to normal screen. 3
OFF
2 Hours
6 Hours
4 Hours
• OFF(Manual): You select “VCR” or “TV”
mode using the VCR/TV
button on the unit or remote.
• ON(Auto): “VCR” mode is automatically
set when VCR is turned on,
or in Play mode.
2 Press
to select AUTO
VCR/TV.
Press to set
ON or OFF.
VCR C / A CLOCK CH
SELECT : SET :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :ON
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
The shut-off countdown will not function
during Play or Record.
Note
When set to “ON,” picture is displayed
regardless of signal strength.
• ON: Picture is displayed despite signal
condition and may be of poor quality.
OFF: Screen turns solid blue when signal is
weak or non-existent.
• Selecting ON has no effect on connected
equipment with blue back feature.
Press ACTION
to return to normal screen. 3
2
1 Press ACTION
to display menu.
Press
to select and
display CHANNEL.
Press
to select
WEAK SIGNAL
DISPLAY, and
press to set ON
or OFF.
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT : SET :
EXIT : ACT I ON
VCR C / A CLOCK CHANNEL
SELECT :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
VCR C / A CLOCK CH
Weak Signal Display ON/OFF Feature
Shuttle Variable Speed Search
Release the Shuttle mode.
Press a function button such as : PLAY,
STOP, etc.
• The VCR performs the function of the button
pressed.
• When the SHUTTLE Ring is turned more
than half in Stop mode, normal Fast Forward
or Rewind will begin.
• Some noise bars are normal during Shuttle
operation.
• After 3 minutes in Still or Slow, the VCR will
go into Stop mode.
• When the SHUTTLE Ring is released, the
VCR goes into Still mode.
The SHUTTLE Ring allows you to smoothly
control the tape speed during special effects
playback in both forward or reverse.
Begin the forward or reverse search.
Turn SHUTTLE Ring while in Play or Still mode.
• The more you turn the Ring, the faster the
search speed will be.
Notes
Advanced Operation
V4622 P22-44 (2nd) [LSQT0509B].p65 2002/05/23, 18:29 35