Record on a tape, Basic operation – Panasonic PV-V4622 User Manual

Page 15

Multi Function
Display

• After 5 min. in Pause mode, VCR

stops to protect the tape and the
video head.

Insert a tape with a record tab (p. 4).

• VCR power comes on.

“VCR” lights on Multi Function
Display. If Auto VCR/TV (p. 35) is set to
“OFF,” press VCR/TV until “VCR”
lights on the Multi Function Display.

Press CH

* or NUMBER keys

to select the channel.

• For “LINE” input, see p. 36.
• For channel over 100, first press 100

key then the other 2 digits.

Press SPEED
to select the record speed (p. 4).

SP = Standard Play LP = Long Play
SLP = Super Long Play

Press REC
to start recording.

• To edit, press PAUSE/SLOW to pause,

and again to resume recording.

Press STOP
to stop recording.

One Touch Recording (recording in progress),
• VCR shuts off after the preset record length.
➛ each press of REC adds 30 min. to the

recording length up to 4 hours.

Record one station, watch another,
➛ press VCR/TV (“VCR” goes out on Multi

Function Display),

➛ select channels at TV (recording

continues).

Select channels at VCR,
• Other channels cannot be viewed during

recording.

➛ press VCR/TV (“VCR” lights up on Multi

Function Display),

➛ select channels at VCR.

This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the

mark. Only tapes

tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.

Record using VCR controls

Press STOP/
EJECT to stop.

CH
CH

SPEED

REC

PAUSE/
SLOW

VCR/
TV

• Watching one channel and

recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.

Ready Checklist

All connections are made (p. 8, 10, 24).
TV and VCR are plugged in.
TV is on and tuned to CH3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR)

• Speed appears on-screen and on Multi

Function Display.

Record on a Tape

*Important:

If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.

STOP

Select
Channel.

Insert
a tape.

Press REC
to start
Recording.

Note

Basic

Operation

V4622 P1-21 (2nd) [LSQT0509B].p65

2002/05/23, 18:28