Lucent Technologies GW-DS300N - Manual (Page 65)

61
4
Chapter 4 Soft AP Mode
4.3 Security Setting
Click “Security Setting” tab on the “Config” page and you can start
configuring authentication. Please refer to the following instructions.
Items Descriptions
Authentication
Authentication Type The authentication of GW-DS300N must set the
same as the settings of the destination.
Open – It does not need authentication when
connecting to the AP.
WPA – includes WPA, WPA-PSK, WPA2 and
WPA2-PSK. WPA and WPA2 are for enterprise
which requires a RADIUS Server and Certificate
Server for the authentication. WPA-PSK and WPA2-
PSK are special modes designed for small office/
home office users who do not have access to the
network authentication servers.
Encryption Type WEP ăAESăTKIPăBOTH (AES & TKIP)–
Please refer to“2.4. Authentication and Security”.
WPA-Preshared Key This setting only takes effect under“WPA-PSK”,
“WPA2-PSK”or“WPA-PSK/ WPA2-PSK”mode.
Besides, the key should be at least 8 characters
and 63 characters at maximum. This Passphrase
(also called a shared secret) that must be entered
in both the wireless access point and the WPA
clients (computers). The WPA pre-shared key
should be a random sequence of either keyboard
characters (upper and lowercase letters, numbers, and
punctuation). You have to enter the same Passphrase
or Hexadecimal key into both your access points and