Lucent Technologies GW-DS300N - Manual (Page 48)

43
3
Chapter 3 Advanced Configuration
especially the adapter is applied to the multimedia
application or a voice call, you can enable the this
function. GW-DS300N will fast roaming to the
near network when the receive sensitivity (signal
strength) is lower to the value you have set up.
When connecting to an AP with authentication, if
enabling this function, it will display dialogs about
802.1x authentication during the process.
C C X 2 . 0 ( C i s c o C o m p a t i b l e E x t e n s i o n s ) i s
developed by Cisco for the radio monitoring and fast
roaming.
1.LEAP turn on CCKM ĈDuring normal operation,
LEAP-enabled client devices mutually authenticate
w i t h a n e w a c c e s s p o i n t b y p e r f o r m i n g a
c o m p l e t e L E A P a u t h e n t i c a t i o n , i n c l u d i n g
communication with the main RADIUS server.
When you configure your wireless LAN for fast
re-association, however, LEAP-enabled client
devices roam from one access point to another
without involving the main server. Using Cisco
Centralized Key Management (CCKM), an access
point configured to provide Wireless Domain
Services (WDS) takes the place of the RADIUS
server and authenticates the client so quickly that
there is no perceptible delay in voice or other time-
sensitive applications.
2.Enable Radio Measurement ĈWhen this parameter
is enabled, the Cisco AP can run the radio
monitoring through the associated CCX-compliant
clients to continuously monitor the WLAN radio
E n a b l e C C X
(Cisco Compatible
eXtensions)
Show Authentica-
tion Status Dialog