Link electronic GT701AP User Manual
Page 6
5
intermittently when there is wireless activity.
Rear Panel
The Access Point has a Power Connector, A LAN (Ethernet) Port, an Antenna Jack,
and a Reset button on its rear panel.
LAN Port
The Ethernet (LAN) port is used to connect the Access Point to a hub or router
with the Gray Crossover Ethernet cable.
Power Port
The Power Port is used to connect the Access Point’s Power Adapter.
Antenna Jack
The Antenna Jack connects the Access Point to its antenna.
Reset Button
The Reset button is used to reset the Access Point and restore the factory default
settings.
See also other documents in the category Link electronic Hardware:
- 861-XL161L (2 pages)
- Two Field Closed Caption Decoder IEC-786 (2 pages)
- 860-XL818C (2 pages)
- Wireless 802.11g AP Router (34 pages)
- HDC-925 (2 pages)
- 861-XL818G (2 pages)
- 862-XL1616HD/1 (2 pages)
- 862-XL818HD/2A (2 pages)
- 861-XL161D (2 pages)
- DigiFlex 1660 (2 pages)
- Component Analog to NTSC Encoding IEC-843 (2 pages)
- SDI Frame Synchronizer Module DigiFlex 1190 (2 pages)
- 860-XL858V (2 pages)
- 8x8 HD/SDI (2 pages)
- 860-XL165AV (2 pages)
- 861-XL818F (2 pages)
- Master Analog Generator SPG-812/SD (2 pages)
- 860-XL816A (2 pages)
- Caption Encoder/Decoder SD SDI/Analog PTC-892 (2 pages)
- 861-XL1616D (2 pages)
- 862-XL1616HD/3 (2 pages)
- 860-XL161C (2 pages)
- 861-XL1616G (2 pages)
- 860-XL165V (2 pages)
- 862-XL1616HD/2 (2 pages)
- 860-XL325AV (2 pages)
- 860-XL325V (2 pages)
- 860-XL858AV (2 pages)
- 862-XL804HD/3A (2 pages)
- Audio Tone Generator 6160 (2 pages)
- 860-XL818A (2 pages)
- 860-XL1616A (2 pages)
- 862-XL804HD/2A (2 pages)
- High Definition Closed Caption Encoder HDE-3000/2 (2 pages)