Lexicon SDP-40 - Manual (Page 49)

RECORD ADVANCED
Selecting RECORD ADVANCED accesses the RECORD ADV menu,
which can be used to configure advanced settings in the Record
Zone.
Default
Parameter Value Values
INPUT SELECT DIGITAL AUTO, ANALOG, DIGITAL
ANLG IN LVL +0dB -18 to +12dB
DIGITAL BYPASS OFF ON, OFF
DIG OUT RATE 44.1kHz 44.1kHz, 48kHz, 88.2kHz,
96kHz, INPUT
RECORD ENABLED ENABLED, BLOCKED
3-16
The SETUP Menu
JBL
INPUT SELECT (AUTO, ANALOG, DIGITAL)
The INPUT SETUP menu allows the selection of two audio
connector types - one analog, one digital. INPUT SELECT specifies
how these connectors interact. The following settings are available:
• The DIGITAL setting forces the unit to utilize the DIGITAL
IN connector for the Record Zone. If an ANALOG IN
connector is also selected, it will be ignored. The unit will
mute when an invalid digital audio input type is received.
Valid digital audio input types include PCM, Dolby Digital,
and dts(-ES). See page 2-16 for more information about
using the DIGITAL setting in multiple zones.
• The ANALOG setting forces the unit to utilize the selected
ANALOG IN connector for the Record Zone. If a DIGITAL
IN connector is also selected, it will be ignored.
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
D 5.1 L7 FILM
dts L7 FILM
MAIN ADVANCED
ZONE2 ADVANCED
RECORD ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 RECORD ADV
INPUT SELECT DIGITAL
ANLG IN LVL +0dB
DIGITAL BYPASS OFF
DIG OUT RATE 44.1kHz
RECORD ENABLED
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
DVD1 is used as an example in this illustration, and will continue to be used as an example
throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input
may be substituted.
SETUP INPUTS DVD1 RECORD ADVANCED