Lexicon SDP-40 - Manual (Page 104)

A-2
Appendix
JBL
SPECIFICATIONS
Audio Inputs and Outputs
Audio Inputs 8 stereo pairs (RCA) or
5 stereo pairs and one
5.1-channel analog input
Digital Audio Inputs 6 coaxial (RCA), 6 optical
(5 TosLink, and 1 optical
mini jack), 1 AES/EBU;
coaxial and optical inputs
conform to IEC-958,
S/PDIF standards
Sample Rates: 44.1, 48, 88.2, 96kHz
Accepts: 16-24 bits PCM audio,
Dolby Digital, dts and
dts-ES discrete data
formats
Main Audio Outputs 12 unbalanced (RCA) and
12 balanced (XLR) for
Front L/R, Center, LFE,
Subwoofer L/R, Side L/R,
Rear L/R, Auxiliary L/R
Zone 2 Audio Outputs 2 stereo pairs (RCA, one
fixed and one variable
output level); 2 balanced
(XLR) for L/R variable
output
Record Audio Outputs 2 stereo pairs (RCA, one
fixed and one variable
output level); 1 coaxial
(RCA) and 1 optical
(TosLink) S/PDIF output
(in parallel)
Performance (Main Zone)
Analog-to-Digital 24-bit, 96kHz, dual-bit
Conversion S ∑ architecture
Digital-to-Analog 24-bit, 44.1 to 192kHz,
Conversion multi-bit S ∑ architecture,
operating in dual-mono
mode
Frequency Response 10Hz to 20kHz,
+0.1dB/-0.25dB,
-0.75dB at 40 kHz,
reference 1kHz
THD + Noise Below 0.008% at 1kHz,
maximum output level
Dynamic Range 108dB minimum, 111dB
typical, 22kHz bandwidth
Signal-to-Noise Ratio 108dB minimum, 111dB
typical, 22kHz bandwidth
Input Sensitivity 200mVrms (2Vrms for
maximum output level) at
0dB input gain
Input Impedance 100k Ω in parallel with
150pF
Output Level 150mVrms typical, 6Vrms
maximum (RCA outputs);
300mVrms typ, 12Vrms
maximum (XLR outputs);
maximum value with
full-scale input signal and
volume at +6dB
Output Impedance 100 Ω in parallel with 150pF
(RCA outputs); 50 Ω in
parallel with 150pF (XLR
outputs)
Performance (Zone 2 and Record Zone)
Analog-to-Digital 24-bit, 44.1 to 96kHz,
Conversion dual-bit S ∑ architecture
(Record Zone only)
Digital-to-Analog 24-bit, 44.1 to 192kHz,
Conversion multi-bit S ∑ architecture
Frequency Response 10Hz to 20kHz,
+0.1dB/-0.25dB,
-0.75dB at 40kHz,
reference 1kHz
THD + Noise Below 0.008% at 1kHz,
maximum output level
Dynamic Range 105dB minimum, 108dB
typical, 22kHz bandwidth
Signal-to-Noise Ratio 105dB minimum, 108dB
typical, 22kHz bandwidth
Input Sensitivity 200mVrms (4Vrms for
maximum output level)
Input Impedance 100k Ω in parallel with
150pF
Output Level 200mVrms typical, 4Vrms
maximum (RCA outputs);
400mVrms typical, 8Vrms
maximum (XLR outputs,
Zone 2 only); maximum
value with full-scale input
signal and volume at 0dB
Output Impedance 100 Ω in parallel with
150pF (RCA outputs);
50
Ω in parallel with 150pF
(XLR outputs, Zone 2
only)