Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 91)

SETUP
MC-12
3-49
STEP DISTANCES LEVELS DISTANCES & LEVELS
E-6
Note:
AUTO DISTANCES
FRONT LEFT 12.0ft
CENTER 10.5ft
FRONT RIGHT 12.0ft
SIDE RIGHT 4.5ft
REAR RIGHT ERROR
REAR LEFT 6.0ft
SIDE LEFT 4.5ft
MONO SUB N/A
SUB RIGHT N/A
LFE N/A
FRONT LEFT 12.0ft
SET DISTANCES
AUTO DISTANCES
ORIGINAL DISTANCES
0.0ft 0.0ft
0.0ft 0.0ft 0.0ft
0.0ft 0.0ft
0.0ft
L M
SUB
R
C
SL
SR
RL
RR
Press the arrow button to open the SET
DISTANCES screen shown above, which can
be used to select the desired speaker
distances.
• Press the and arrow buttons to toggle
between calibrated speaker distances
(AUTO) and original speaker distances. The
speaker graphics at the bottom of the
on-screen display will update to indicate
the selected values.
• Press the arrow button to apply the
selected values. A confirmation message
will appear on the on-screen display,
indicating that the selected values have
been applied.
• When the desired values have been applied,
press the
arrow button twice in succession
to return to the SPEAKER SETUP menu.
If desired, refer to the MANUAL CALIBRATION section that begins on page 3-51 to fine-tune individual speaker distances and output levels. It is recommended to
configure BASS PEAK LIMITERS menu parameter settings (page 3-56).
Press the arrow button to return to the
AUTO SPEAKER SETUP results screen shown
above.
• If desired, follow the instructions in step E-5
to select the other calibration procedure.
Otherwise, press the the
arrow button to
return to the SPEAKER SETUP menu.
* The AUTO DISTANCES screen is shown above
as an example. The AUTO LEVELS screen can
be substituted.
Press the arrow button to open the SET
LEVELS screen shown above, which can be
used to select the desired speaker output
levels.
• Press the and arrow buttons to toggle
between calibrated output levels (AUTO)
and original output levels. The speaker
graphics at the bottom of the on-screen
display will update to indicate the selected
values.
• Press the arrow button to apply the
selected values. A confirmation message
will appear on the on-screen display,
indicating that the selected values have
been applied.
• When the desired values have been applied,
press the
arrow button twice in succession
to return to the SPEAKER SETUP menu.
AUTO LEVELS
FRONT LEFT -2.0dB
CENTER ERROR
FRONT RIGHT -2.0dB
SIDE RIGHT -4.5dB
REAR RIGHT -3.0dB
REAR LEFT -3.0dB
SIDE LEFT -4.5dB
MONO SUB N/A
SUB RIGHT N/A
LFE N/A
FRONT LEFT -2.0dB
SET LEVELS
AUTO LEVELS
ORIGINAL LEVELS
0.0dB 0.0dB
0.0dB 0.0dB 0.0dB
0.0dB 0.0dB
0.0dB
L M
SUB
R
C
SL
SR
RL
RR
AUTO SPEAKER SETUP
DISTANCES OK
LEVELS ERROR
AUTO VALUES APPLIED
PRESS V TO VIEW
DETAILS
AUTO DISTANCES*
FRONT LEFT 12.0ft
CENTER 10.5ft
FRONT RIGHT 12.0ft
SIDE RIGHT 4.5ft
REAR RIGHT ERROR
REAR LEFT 6.0ft
SIDE LEFT 4.5ft
MONO SUB N/A
SUB RIGHT N/A
LFE N/A
FRONT LEFT 12.0ft
. . . Step E: Performing Automatic Calibration continues on page 3-50