Kyocera S4000 - Manual (Page 61)

User Guide 53
Do the following to unlock the phone:
1.
From the home screen, select Unlock .
2. Enter your four-digit lock code.
Limit calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider’s numbers.
1.
Select Settings > Security .
2. Enter your four-digit lock code.
3. Select Limit Calls and one of the following:
– No Limit : does not limit calls.
– Limit Outgoing limits outgoing calls
while incoming calls still work.
– Limit All limits both incoming and
outgoing calls.
Emergency numbers
The emergency numbers feature enables you to
specify three personal phone numbers you can
call when the phone is locked.
1.
Select Settings > Security .
2. Enter your four-digit lock code.
3. Select Emergency Numbers .
4. Select an Unassigned slot.
5. Enter the number and select Done .
You can view these numbers only when entering
them for the first time.
To make a call to an emergency number from a
locked phone, you must dial the number
(including area code) exactly as it was stored in
Emergency Numbers.
Erase contacts
You can erase all entries from your Contacts list.
1.
Select Settings > Security .
2. Enter your four-digit lock code.
3. Select Erase Contacts and one of
the following:
–
No exits without erasing contacts.
– Yes erases all contacts. A confirmation
prompt appears to verify your decision.
4. Select Yes to confirm.
New lock code
The lock code is typically 0000 or the last 4 digits
of your phone number. To change your lock code
from the default provided by the service provider:
1.
Select Settings > Security .
2. Enter your four-digit lock code.
3. Select Lock Code .
4. At the confirmation, select Yes .
5. Enter a new four-digit code.
6. Re-enter your new lock code.
82-K6562-1EN.book Page 53 Sunday, April 13, 2008 9:31 PM