SP Studio Systems SP-12 - Manual (Page 84)

APPENDIX
© E-mu Systems, Inc. 1985 Page 84
Enhanced by The Emulator Archive 2002 www.emulatorarchive.com
Audio “exciters”: To brighten up a sampled signal, use a device such as an Aphex
Aural Exciter or EXR Projector. Both of these devices add a high-end “sheen” without
adding the stridency encountered with excessive high-frequency equalization.
Using noise reduction: A number of single-ended noise reduction units (such as the
MicMix Dynafex or Rooktron Hush) are now available; these do not require that the
noisy signal have been previously encoded, as is the case with Dolby and dbx. If
your source signal is noisy, one of these devices can help to greatly clean up the
overall sound quality as you sample.