Sennheiser WiCOS - Manual (Page 55)

53
Configuring the conference system
Adjusting the RF settings – “ RF configuration “
Setting the RF signal strength – “General“
The RF signal strength of the conference system can be set in two different
ways:
• automatic setting of the RF signal strength (recommended)
• manual setting of the RF signal strength
̈
In the main navigation, click “ RF Configuration ”.
The “ General RF settings ” overview screen appears.
To set the RF signal strength to automatic mode :
̈
In the “ Room size ” box, select the “ (Auto) ” option button.
̈
Click “ Save settings ”.
The setting is saved. The RF signal strength is automatically adapted to
the operating conditions/room size.
To manually set the RF signal strength:
̈
In the “ Room size ” box, select the appropriate option button:
̈
Click “ Save settings ”.
The setting is saved. The RF signal strength is set to the selected power.
Setting the frequencies – “General“
The frequency selection of the conference system can be set in two
different ways:
Option button RF signal strength Area of application
“ Big “ maximum RF signal
strength large rooms of
approx. 3000 m²
“ Medium “ medium RF signal
strength medium sized rooms of
approx. 2000 m²
“ Small “ low RF signal strength small rooms of
approx. 1000 m²