Sennheiser WiCOS User Manual
Page 17
15
Overview of the components
Multi-function display 7 of the WiCOS CV chairman unit
The multi-function display
7
can display three different operating modes.
To switch between the operating modes and displays:
̈
Press the ABSTAIN key
C
for approx. 3 seconds.
You can switch between the following modes and displays:
– Voting mode (“
Start/Stop Voting
”)
– Volume adjustment mode for loudspeakers (“
Volume Control
”) and
– Media control mode (“
Function key
”).
Depending on the mode, the selection key A
8
and the selection
key B
9
are assigned different functions.
The display has an automatic brightness control. Approx. 4 seconds after
the last key press, the brightness will be reduced. With each key press, the
display will light up with maximum brightness.
9
C
8
7
You can also switch between the operating modes using the web
server (see page 65).
Voting mode
“Start/Stop Voting”
Display
Function/Meaning
L
Start
Selection key B
9
starts a voting session
M
Stop
Selection key A
8
stops a voting session
Volume adjustment mode for
loudspeakers “Volume Control”
Display
Function/Meaning
N
Volume of the
conference units’
loudspeakers
Adjusted volume of the conference units’ loudspeakers
K
Selection key A
8
increases the volume
Selection key B
9
reduces the volume
Media control mode
“Function key”
Display
Function/Meaning
O
Media control 1
Selection key A
8
controls external media devices
P
Media control 2
Selection key B
9
controls external media devices
L
M
N
O
P