Sony RM-VL1000T - Manual (Page 36)

36
7
Press the Label select
button(s) or other button(s)
on the Commander for the
desired operation.
If you want to turn on the TV,
press the 1 button.
8
Repeat Steps 6 and 7 and
programme the buttons for
the series of operations.
In this example, press the
following buttons.
9
When you have
programmed all the keys
and buttons, press the SET
button.
With a beep sound, a series of
operating commands is
registered.
The display returns to Step 5.
If you press the SET button
The display returns to the previous
one.
Executing a Series of Commands
— System Control Functions
(continued)
The selected component name
is displayed on the bottom of
the LCD display, and the labels
for the operation of the
component are displayed. To
change the labels, press the
SCROLL button repeatedly.
To select another component,
press the COMPO button.
SYSTEM
SET
SYSTEM2
PIP SWAP
PIP MOVE
PIP CH+
PIP CH-
TV
6
Select the component to
operate by pressing the
Label Select button (in this
case, TV).
To change the labels, press the
SCROLL button repeatedly.
SYSTEM
SET
SYSTEM2
TV
SAT1
VCR1
DVD
VCR1
AMP
TV
VCR1