Sharp UX-355L - Manual (Page 48)

Setting Up and Using OpenLCR
46
3
Press the number keys to enter the
new phone number.
2
Press 1 (SET) to set the new phone
number.
•
Note: If you want to restore the
factory-set number, press 2 for
CLEAR and then go to Step 4.
1
4
Press the START/MEMORY key to
store the number.
START/MEMORY
5
Press the STOP key to return to the
date and time display.
STOP
6
Press the OpenLCR key and 2 to
download new rate data.
•
If you have not yet registered with
OpenLCR, your fax will receive new
phone numbers that will allow you to
connect to OpenLCR. Register using
one of the procedures described at the
beginning of this chapter.
2
1
Press these keys:
The display will show:
CENTER # MODE
7
FUNCTION
OpenLCR
all.book Page 46 Wednesday, April 26, 2000 7:08 PM