Sharp UX-355L - Manual (Page 46)

Setting Up and Using OpenLCR
44
Changing your user profile
To call OpenLCR to change your user profile, follow these steps:
1
Pick up the handset on the fax
machine.
2
Press the OpenLCR key and then the
3 key.
3
If the display shows the alternating
messages at right, press the number
keys to enter your fax/phone number,
including the area code (the number
must be 10 digits long). When
finished, press the START/
MEMORY key.
(Note: If the message at right doesn’t
appear, this step is not necessary.)
SET OWN NUMBER
10 DIGITS
3 2 1 4 4 1 1 4 4 2
(Example)
START/MEMORY
3
4
Follow the instructions you hear.
♦
Note: If you are on a pulse dial line, press the
* key before
pressing the number keys to respond.
(This makes your fax temporarily issue tone signals when you press
the number keys.)
OpenLCR
Important!
Be sure that you enter your correct area code and fax
number. If not, your fax may not dial the correct number
to connect to OpenLCR.
all.book Page 44 Wednesday, April 26, 2000 7:08 PM