Sharp UX-355L - Manual (Page 110)

Blocking Reception of Unwanted Faxes
108
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes
from parties which you specify. This saves paper by not printing out
unwanted "junk" faxes.
To use this function, follow the steps below to turn it on, and then
enter the fax numbers from which you do not want to receive faxes as
indicated in the procedure that follows.
1
Press these keys:
The display will show:
JUNK # CHECK
Entering Anti Junk numbers
Enter (or clear) a number in the Anti Junk List as shown below. Up to
five numbers can be entered.
♦
To clear a number from the Anti Junk Number List, you need to
know the 1-digit number which identifies it. If you have forgotten
this number, print out the Anti Junk Number List as explained on
page 119.
2
Press 1 to turn on the Anti Junk
function, or 2 to turn it off.
1 2 or
YES NO
3
Press the STOP key to return to the
date and time display. STOP
FUNCTION
4
all.book Page 108 Wednesday, April 26, 2000 7:08 PM