beautypg.com

Samson RFX Keypad 2190 User Manual

Page 12

background image

Adding and Deleting RF Meters: (Meter and Hose are synonymous)

This set of screens allows the Supervisor to add or delete RF Meters from
the keypad system.

The RF Meter identification number can be found on the RF Meter
under the battery pack

The RF Meter identification number format is 10 decimal digits
(-.---.---.---)

Leading zeros must be entered

X.XXX.XXX.XXX

RF Meters can be added and deleted

Maximum of 48 RF Meters

A given keypad can exchange data only with RF Meters whose
identification number is in this list.

All RF Meters addresses and ids are unique

The relationship between tank and RF Meter will be 1:n (one tank
assigned to n RF Meters). Since there will be a relationship
between tank and fluid type, the RF Meter will be assigned to one
fluid type.

Initially the RF Meter address list is empty

Create Hose

-.---.---.---

Active keys:

Numeric keys,

,

,

Action:

• After validated RF Meter address is entered the tank-hose screen is

displayed

• Enter key with no entry Æ moves to Delete Hose screen
• If RF Meter address already used Hose Address Already Used Screen is

displayed

Hose Address

Already Used

Active keys:

There is no active key.
This screen is displayed if another RF Meter already uses the last three
number of the RF Meter.
If this screen displays check RF Meters in system to make some duplicate
RF Meters do not exist, then check to see if this RF Meter has already been
created in the system.
It is displayed for 3 seconds and it comes back to create hose screen.

Samson Corporation-Swannanoa, NC 28778 800.311.1047 www.samsoncorporation.com