Network parameters, Device id, Custom groups – Shure The SM58 Vocal Artist UHF User Manual

Page 8

Shure UHF-R Wireless

Network Parameters

NOTE:

• The receiver reboots after you press

ENTER

to accept net-

work parameter changes

• In dual models (UR4D), these settings affect both receivers

(the dual receiver is treated as a single network device).

Set the Receiver Network Mode

Menu:

Util > Network

1. Push the

Control

wheel to move the cursor to the

Mode

parameter.

2. Turn the

Control

wheel to set the receiver to one of the

following values:

•

DHCP: use this setting when connecting the receiver to a
DHCP server.

•

Manual: allows you to set the receiver to a specific IP ad-
dress or subnet.

IP Address and Subnet

Menu:

Util > Network

NOTE: To change these settings, the network mode must be
set to

Manual.

1. Push the

Control

wheel to move the cursor to any of the

following parameters:

•

IP (IP address)

•

Sub (Subnet mask)

2. Turn the

Control

wheel to change the value.

Device ID

Assists in identifying receivers through the Wireless Work-
bench Software (has no effect on network identification).

Menu:

Util > Network

1. Push the

Control

wheel to move the cursor to the

DevID parameter.

2. Turn the

Control

wheel to set the receiver to change the

value.

Custom Groups

This feature allows you to create your own groups of
frequencies.

Creating new groups...

Menu:

Radio > Custom

1. Turn the

Control

wheel to select a custom group number

(

U1, U2, U3, etc.)

2. Push the

Control

wheel to move to the

Channel parameter and turn it to select a
channel (

01, 02, 03, etc.)

3. Push the

Control

wheel to move to the

Freq parameter

and select a frequency for that channel.

4. Push the

NEXT menu key to select a frequency for the

next channel in that group.