Shure The SM58 Vocal Artist UHF - Manual (Page 13)

15
English
Automatic Transmitter Sync
This feature automatically updates a bodypack or handheld transmitter’s group and channel settings to match those of a selected
receiver.
To perform a transmitter sync...
1. Open the transmitter battery cover to display the infrared (IR) port.
2. With the IR port exposed to the receiver, select Sync > sync from the receiver LCD interface.
The display on the receiver indicates whether the sync was successful. If the sync fails, try again, making sure that the IR port on the
transmitter is exposed and directly faces the IR port on the receiver.
NOTE: Close the battery door before performing a sync on other transmitters.
To transfer other transmitter settings...
Optionally, you can transfer other transmitter settings from a receiver when you perform a sync. Use the following steps:
1. Select Sync > Setup from the receiver LCD interface.
2. Turn the Control wheel to change parameter settings.
3. Push the Control wheel to move to the next parameter.
4. Push the flashing ENTER button to save the settings.
The transmitter settings you set on the receiver remain for future syncs.
NOTE: If you don’t want the sync to send a setting, set the parameter to No Change
Available Settings...
The following settings are available from the Sync > Setup menu:
• Sensitivity ( Sens) bodypack only
• Gain ( Gain)
• RF Power ( Pwr)
• Power and Frequency Lock ( Lock), which has the following values:
Power lock only: ( Pwr Only)
Frequency lock only: ( Freq only)
Both: ( Freq and Pwr)
Neither: ( Unlocked)
• Custom Groups ( CG):
On ( ON): Send custom groups to transmitters during sync
Off ( OFF): Do not send custom groups (reduces sync time)
Audio ABJ 779-810 MHz Navigate RF
OL OL
Audio ABJ 779-810 MHz Navigate RF ®
UR4D
Wireless Receiver with Audio Reference Companding
sync
Control Monitor Power
sync
Monitor Clip
ENTER
EXIT
push
1
2