Sony RM-NX7000 - Manual (Page 154)

154
Continued
Programming a List element
Step 2: Programming a macro
In this step, programming a macro for a List element created in “Step 1” is
explained.
1 Press the [MACRO] tag.
2 Press the [v] or [V] key to
select an element you want
to program a macro for, and
then press the [ENTER] key.
Each time you press the [v]/[V] key, the
cursor moves up/down by an element. If
you press the [v]/[V] key for 2 seconds
or longer, the window display scrolls.
If you select a List element a macro has been already programmed for
A confirmation display for deleting a macro appears.
If you press the [YES] key, a macro already programmed is deleted, and the
display goes to step 3.
If you press the [NO] key, the display returns to the previous one.
3 Program a macro for an
element.
After pressing all function keys and
buttons you want to program as the
macro procedure, press the [OK] key.