beautypg.com

SUPER MICRO Computer SUPER X7DB8 User Manual

Page 70

background image

4-12

X7DB8/X7DBE User's Manual

Memory Branch Mode

This option determines how the two memory branches operate. System address

space can either be interleaved between the two branches or Sequential from one

branch to another. Mirror mode allows data correction by maintaining two copies

of data in two branches. Single Channel 0 allows a single DIMM population during

system manufacturing. The options are Interleave, Sequential, Mirroring, and

Single Channel 0.

Branch 0 Rank Sparing

Select enable to enable the sparing feature for Branch 0 Rank. The options are

Enabled and Disabled.

Branch 1 Rank Sparing

Select enable to enable the sparing feature for Branch 0 Rank. The options are

Enabled and Disabled.

Enhanced x8 Detection

Select Enabled to enable Enhanced x8 DRAM UC Error Detection. The options

are Disabled and Enabled.

Crystal Beach Features

This feature cooperates with Intel I/O AT (Acceleration Technology) to accelerate

the performance of TOE devices. (*Note: A TOE device is a specialized,

dedicated processor that is installed on an add-on card or a network card to

handle some or all packet processing of this add-on card. For the X7DB8/E,

the TOE device is built inside the ESB 2 South Bridge chip.) The options are

Enabled and Disabled.

Route Port 80h Cycles to

This feature allows the user to decide which bus to send debug information to. The

options are Disabled, PCI and LPC.

Clock Spectrum Feature

If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused

by the components and will attempt to decrease the interference whenever needed.

The options are Enabled and Disabled.

Enabling Multi-Media Timer

Select Yes to activate a set of timers that are alternative to the traditional 8254

timers for the OS use. The options are Yes and No.

USB Function

Select Enabled to enable the function of USB devices specifi ed. The settings are

Enabled and Disabled.

Legacy USB Support

This setting allows you to enable support for Legacy USB devices. The settings

are Enabled and Disabled.

This manual is related to the following products: