SUPER MICRO Computer SUPER X7DB8 - Manual (Page 46)

2-26
X7DB8/X7DBE User's Manual
GLAN1
®
JLAN1
S UPER X7DB8/E
GLAN2
Fan1
8-pin PWR
FP Ctrl
SPK
PW LED
JOH1
Fan3
IDE1 Floppy
BIOS
320 SCSI Channel A
Fan4 SATA1 SATA0
USB2/3
SMB
PCI-X 100 MHz ZCR
PCI-X 133 MHz
JWD
Battery
VGA
PCI-Exp x8
North Bridge
VGA
COM1
USB0/1
KB/
Mouse Fan6 Fan5 ATX PWR
4-Pin
PWR
J3P
Parrallel Port
24-Pin
JPG1
SCSI CTRL
CPU1
CPU2
South
Bridge
PXH
DIMM 1A (Bank 1)
Fan7
JAR
PSF
Fan2
Compact Flash
LE1
Fan8
JCF1
JWF1
JPA2 JPA3
JPA1 320 SCSI Channel B
SATA3 SATA2
SATA4 SATA5 JL1 JK1
Slot1
Slot2
Slot3
PCI-X 133 MHz
Slot4
JPL1
JPL2
Slot5
PCI-Exp x4
Slot6
PCI-Exp x8 SEPC
SIMLP IPMI Slot7
DIMM 1B (Bank 1)
DIMM 2A (Bank 2)
DIMM 2B (Bank 2)
DIMM 3A (Bank 3)
DIMM 3B (Bank 3)
DIMM 4A (Bank 4)
DIMM 4B (Bank 4)
JBT1
USB4
JWOR
JCOM2
DA2
WOL
DA1
S I/O
JP1
LAN
CTRL
J27
J28
SGPIO1
SGPIO2
SMB PS
CTRL
J7
A
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
nation Enable
SCSI Controller Enable/
Disable
Jumper JPA1 is used to enable or disable
the LSI SCSI controller. The default set-
ting is on pins 1-2 to enable SCSI. See
the table on the right for jumper settings.
SCSI Termination Enable/
Disable
Jumpers JPA2/JPA3 are used to enable
or disable termination for SCSI Channel
A (JPA2) and Channel B (JPA3) con-
nectors. The default setting is open to
enable termination. See the table on the
right for jumper settings.
*Note: In order for the SCSI drives to
function properly, please do not change
the default setting (enabled) set by the
manufacturer.
SCSI Term. Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Open Enabled
Closed Disabled
B C
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled