SUPER MICRO Computer 6113L-8 - Manual (Page 60)

S UPER S ERVER 6113L-8/6113L-i User's Manual
5-24
LED
Color
Off
Green
Orange
Definition
No Connection
100 Mb
1 Gb
Gb LAN Right LED
Indicator
5-10 Onboard Indicators
GLAN LEDs
Each of the Gigabit Ethernet LAN
ports (located beside the COM2 port
on the back panel) has two LEDs.
The yellow LED indicates activity
while the other LED may be green,
orange or off to indicate the speed of
the connection. See the table at right
for the functions associated with the
second LED.
SCSI Enable/Disable
(6113L-8 only)
The SCSI jumper at JA1 allows you to
enable or disable the onboard SCSI
controller. The normal (default) posi-
tion is on pins 1-2 to enable SCSI ter-
mination. See the table on the right
for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI Enable/Disable
Jumper Settings
(JA1)
Debug LEDs
There are two debug LEDs located
next to the IDE 2 Connector to indi-
cate common debug messages.
See the table below for the functions
associated with the debug LEDs.
Debug LED Indications
(DS3, DS4)
DS3 DS4
On On
Off On
On Off
Off Off Indication
SNC found and start memory sizing
Initial system memory and SIOH
Valid memory and SIOH found
ICH4 found