SUPER MICRO Computer 6113L-8 - Manual (Page 100)

C-6
S UPER 6113L-8/6113L-i User's Manual
C-3 Adding the CD-ROM Boot Option in EFI
1. Power on the system and enter the “EFI Boot Manager”.
2. Select “Boot Option Maintenance Menu."
3. Select “Add a Boot Option.”
4. Select “Removable Media Boot [Acpi(PNP0A03,0)/Pci(1F|1)/
ATA(Secondary,Master)]”.
(Note: if your CD-ROM drive is connected to the primary IDE connector,
you must choose it accordingly.)
5. Enter a new description, such as “CD-ROM”.
6. When prompted with “Enter Boot Option Data", type [A-Ascii U-Unicode
N-No boot Option]”. Then, press .
7. When prompted with “Enter Boot Option Data", type [Data will be stored
as Unicode string:]” Then, press .
8. When prompted with “Save changes to NVRAM [Y-Yes N-No]”,
press Y
9. Select the "Exit" option to exit the "Add Boot Option Menu".
10. Select the "Exit" option to exit the "Boot Maintenance Menu"
11. Once back in the EFI Boot Manager, you now can select the CD-ROM
boot option to boot from the OS installation CD.