SUPER MICRO Computer 6113L-8 - Manual (Page 44)

S UPER S ERVER 6113L-8/6113L-i User's Manual
5-8
3. Secure the heatsink onto the CPU by tightening all four screws.
4. Repeat the above steps to install a second heatsink on a second CPU if
needed.
Figure 5-3. CPUs (2) with Heatsinks Installed
Connecting AC Power
1. Connect the 24-pin power connector from the AC power supply to the
serverboard. See the serverboard layout diagram in this chapter for the locations
of the power connectors.
2. Connect the two (2) 4-pin 12V power connectors from the AC power supply
to the power pods.
3. Refer to the next section for details on all connections.