Silvercrest KH 2380 - Manual (Page 15)

1 GB/IE
• Press the
PWR / DIM
button cn and adjust the
brightness (dimming).
- The tuner is activated and [FM 1] (1st FM
band), 87.0 (station frequency) appears in
the display window
3 . [EON] and [AF] flash.
- The loudspeakers play back the reception from
the tuner.
• Turn the “SEL / VOL” control knob cp to adjust
the volume as desired.
L
Turning off
• Press and hold the
PWR / DIM
button cn for two
seconds. The background light of the control
panel
1 goes out and the display window 3
reads [GOODBYE]. When turning off, the
device stores all settings from the last
operation. When turning the device on again,
the last used audio storage medium or the
tuner starts to play.
L Selecting and adjusting the sound
VOL: Volume of the loudspeakers
• Adjust the loudspeakers to the desired volume
by turning the “SEL / VOL” control knob cp .
BAS: Bass (lower range of the loudspeaker sound)
• Press THE “SEL / VOL” control knob
cp until
[BAS] appears in the display window 3 .
• Turn the “SEL / VOL” control knob cp to set the
desired bass level.
Values between [-7] and [7] can be selected.
TRE: Treble (higher range of the loudspeaker sound)
• Press the “SEL / VOL” control knob
cp
repeatedly until [TRE] appears in the display
window 3 .
• Turn the “SEL / VOL” control knob cp to set the
desired treble level.
Values between [-7] and [7] can be selected.
BAL: Balance (difference in volume between the
left and right loudspeakers)
• Press the “SEL / VOL” control knob cp until
[BAL] appears in the display window 3 .
• Turn the “SEL / VOL” control knob cp to set the
desired balance.
Values between [8L] and [8R] can be selected.
The mean value is [0].
FAD: Fading (difference in volume between the
front and rear loudspeakers)
• Press the “SEL / VOL” control knob
cp until
[FAD] appears in the display window 3 .
• Turn the “SEL / VOL” control knob cp to set the
desired fading level. Values between [8F] and
[8R] can be selected. The mean value is [0].
Your settings are automatically stored.
L Selecting and adjusting
playback functions
• Press the “SEL / VOL” control knob cp and keep
it held down for two seconds.
In order to select the next function press the
“SEL / VOL” control knob
cp until you have
reached the required function.
INVOL: Volume when switching on.
• Turn the “SEL / VOL” control knob
cp to set the
desired volume of the car radio when
switching on.
ADJ: Time display.
• Set the desired hour setting by turning the
“SEL / VOL” control knob cp clockwise.
• Set the desired minute setting by turning the
“SEL / VOL” control knob cp counter clockwise.
TAVOL: Volume at which the traffic information is
played back from the tuner.
• Turn the “SEL / VOL” control knob cp to set the
desired volume of the traffic information
played through the tuner. Please ensure that
this important information for road users is
loud enough for you to hear.
Note: If the volume is too high there is a danger
that you will be startled or unable to hear other
road users.
Operation
KH2380_Content_UK.indd 15 12.09.2006 11:57:13 Uhr