Sony SPP-933 - Manual (Page 21)

Telephone Features
21 US
Telephone Features
Storing phone numbers on the base phone
1
Press (PGM).
The SPEAKERPHONE lamp
flashes quickly.
2
Press one of the dialing keys
((0) to (9)) for the phone
number to be stored.
You’ll hear a confirmation beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press (PGM) again.
You’ll hear another
confirmation beep, and the
number is stored.
Notes
• In step 3, if you don’t enter the phone number, the previously stored number
will be erased.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• You cannot store phone numbers on the base phone while the handset is
being used. The LINE lamp will light up to indicate this condition.
Tips
• If you enter a wrong number, press (PGM), then start from the beginning.
• Use the supplied directory to write down what you have stored to the speed
dialing numbers.
continued
(REDIAL/PAUSE)
SPEAKERPHONE
lamp
LINE lamp
(SPEAKERPHONE)
(SPEED DIAL)