Sony SPP-933 - Manual (Page 20)

20 US Telephone Features
Speed dialing
You can dial with a touch of a few buttons by storing a phone number
on a dialing key. You can store up to 10 different phone numbers
separately on the handset and on the base phone.
Storing phone numbers on the handset
1
Press (PGM).
The TALK/BATT LOW lamp
flashes.
2
Press one of the dialing keys
((0) to (9)) for the phone
number to be stored.
You’ll hear a confirmation beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press (PGM) again.
You’ll hear a confirmation beep,
and the number is stored. The
TALK/BATT LOW lamp goes
off.
Notes
• In step 3, if you don’t enter the phone number, the previously stored number
will be erased.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• Before storing phone numbers, make sure the handset is not in use.
Tips
• If you enter a wrong number, press (OFF), then start from the beginning.
• Use the supplied directory to write down what you stored on the speed
dialing numbers.
Telephone Features
(REDIAL/PAUSE)
TALK/BATT
LOW lamp
(SPEED DIAL)
(OFF)
(TALK)